The Comfort Touch is a modulating room thermostat that automatically adjusts your central heating boiler’s power output in response to your desired temperature setting. This ensures long-lasting, energy-efficient boiler operation. It only works in combination with Intergas Smart Power-compatible boilers (February 2017 or later).

Yes, it’s possible to use your Comfort Touch with underfloor heating. Underfloor heating responds more slowly than regular radiators. You can adjust your heat settings on the configuration screen. Press the ‘+’ and ‘–’ symbols simultaneously for two seconds to enter this configuration screen. Using the ‘+’ and ‘–’ symbols, advance to the ‘Ctrl’ screen. Set the control response time for underfloor heating to ‘1’ (SLo).

Yes, of course. Adjust this setting on your Comfort Touch’s configuration screen. Press the ‘+’ and ‘–’ symbols simultaneously for two seconds to enter this configuration screen. Using the ‘+’ and ‘–’ symbols, advance to the ‘Conf’ screen. Select either ‘Celsius’ or ‘Fahrenheit’.

Your Comfort Touch comes with a special cleaning mode. Press the ‘•’ symbol for 2 seconds to activate cleaning mode. This temporarily locks your Comfort Touch so that you can clean its screen without inadvertently altering any settings. The lock lapses automatically after 30 seconds.

Yes, of course. By default, the Comfort Touch’s brightness level is set to 5 (max. 10). Adjust this setting on your Comfort Touch’s configuration screen. Press the ‘+’ and ‘–’ symbols simultaneously for two seconds to enter this configuration screen. Using the ‘+’ and ‘–’ symbols, advance to the ‘Bri’ screen. Adjust the brightness, as desired.

You can alter your Comfort Touch’s settings on its configuration screen. Press the ‘+’ and ‘–’ symbols simultaneously for two seconds to enter this configuration screen. Adjust the thermostat’s settings, as desired. Use the ‘+’ and ‘–’ symbols to scroll through the various menus. Confirm selections by tapping centre dot.